1. <rp id="b5fgf"><object id="b5fgf"></object></rp>
      <rp id="b5fgf"></rp>

      <th id="b5fgf"><track id="b5fgf"><sup id="b5fgf"></sup></track></th>

        1. 主要施工器具

          主要施工器具
          Main Application Equipment and Tools
          No.
          器具名稱 作用功能
          1

          含水率檢測儀

          Moisture tester

          檢測混凝土基面的含水率,以確定是否適合施工

          Check concrete surface moisture to determine applicability

          2

          拉拔實驗儀  Pull-off tester

          回彈儀        Rebound hammer

          檢測混凝土基面的粘結強度  Check cohesive strength of concrete substrate

          檢測混凝土基面的抗壓強度  Check compressive strength of concrete substrate

          3

          拋丸(噴砂)機

          Shot blasting machine

          對混凝土基面進行糙化處理,最理想的處理工具

          Roughen concrete substrate, optimal preparation tool

          4
          無塵研磨機

          Dust-free grinding machine

          對混凝土基面進行糙化處理

          Roughen concrete substrate

          5
          銑刨機

          Scarifier

          快速清除不需要之舊涂層等,并使基面糙化

          Quick-remove old coatings, also for surface roughening

          6
          抹光機(環氧砂漿用)

          Trowelling machine ( Mortar application )

          施工環氧砂漿,抹平,壓實,以期達到最佳強度

          For epoxy mortar application, provide level, dense and high strength mortar floor

          7
          高壓無氣噴涂機

          High-pressure airless sprayer

          涂層地坪面層進行噴涂施工,獲得最佳的外觀

          Spray top coat paint to gain optimal appearance

          8
          切縫機

          Joint cutter

          整齊切開所設伸縮縫并填充彈性體

          Cut joint to receive elastic filler

          9

          鏝刀

          Trowel

          施工厚涂層

          Apply thick coat

          10
          各種滾筒

          Roller

          • 針刺滾筒:消泡                   Spike roller : remove bubble
          • 紋理泡沫滾筒:紋理狀面層   Textured roller : achieve textured finish
          • 長毛滾筒:拉毛,底涂          Long pile roller : primer application
          • 短毛滾筒:面涂                   Short pile roller : top coat application
          11
          清洗機

          Cleaning machine

          清洗已完工面層并進行養護

          Clean finished top coat surface and start curing

          12
          電阻機(兆歐表)

          Electrical resistance tester

          測定涂層的導電性能

          Check conduction property of the coat

          13
          溫濕度計,表面溫度計

          Thermo-hygrometer, surface thermometer

          測定施工環境的濕度,測定欲涂基面的溫度

          Check environmental temperature, humidity and coated surface temperature


          TEL

          15316367090

          首頁
          電話
          短信
          聯系
          ZZIJZZIJ亚洲日本少妇